Architectural Specifications

Playgrounds – Recycled Rubber (Poured-in-Place)

General Requirements

Fortco Limited Playsafe (Poured-in-Place) is a seamless rubber play area surface consisting of recycled rubber tire granules combined together with a highly sophisticated polyurethane binder. Designed and installed by Fortco Ltd. to meet and surpass all current CSA standards.

Download Specs & Drawings:

PDF
Word

 

Testing

Tested in accordance with ASTM F-1292 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment. Playsafe has been tested according to ASTM F-1292, C.S.A. and meeting CPSC standards for playground surfacing and providing a GMAX of less than 200 and a HIC of less than 1000. Playsafe (Poured-in-Place) has been tested to meet all CAN/CSA-Z614-07 Standards on Childrens’ Playspaces and Equipment — a National Standard of Canada.

 

Quality Assurance

• Installer shall have at least five (5) years proven experience in the industry and be approved by product manufacturer;
• Submit 300mm x 300mm product samples in specific color and specified thickness;
• Playsafe safety surface will only be installed when temperatures exceed 5°C. Installation during dry weather conditions is recommended.
• Playsafe will require a minimum of 24-48 hours for curing period.
• Playsafe installed by Fortco Limited. Tel: (416) 720-1450, Email: sandro.forte@sympatico.ca.

 

Colour

Standard Colours

Terra Cotta, Forest Green, Blue, Black

(see our Colours page for examples)

Installation – Base Preperation

• Fortco Limited Playsafe can be installed on granular, asphalt or concrete surfaces.
• When using a granular base, a minimum of 30mm to 120mm depth is required, compacted to a 95% proctor density. A water percolation rate of 60 liters/M2/hour. Should the rate be less, a French drain must be installed to provide adequate water flow. A geotextile between the granular base and surface is recommended (terrafix 200R).
• Granular, asphalt or concrete surfaces require a slope of no less than 2% to drain, acknowledging that Playsafe is a water permeable surface.
• Base can be sloped up to 30 degrees within the installation area.

Thickness of Poured – In – Place

• Thickness of the safety surface will be determined by the current CSA Standards for playground surfacing. Thickness of the rubber safety surface can range from 30mm to 120mm, 3ft-10ft fall height, meeting CSA and ASTM standards for playground surfacing.
• Polyurethane binder shall be mixed throughout the entire thickness.
• Bevel is installed at the perimeter of the installation running from the thickness of the surface down to the base. The outside line of the bevel must be clear and follow the designed edge of the installation.